Bevelling machine CHP 12 INV

Home/Products/Universal roded bevelling machines/Bevelling machine CHP 12 INV

Bevelling machine CHP 12 INV

The CHP 12 INV can bevel in an upside-down position effortlessly in a complete self-feed mode. As its emblematic model the CHP 12, the beveler CHP 12 INV is the perfect solution to bevel largediameter tubes as well as tankheads, thanks to its breathing valves.

Its bevelling speed makes this machine the most high performance and flexible beveling system of all the CHP 12 range for large plates and diameter tube bevelling, simplifying production processes as much as possible and reducing production time.

Go to the video

Description

Performances

  • Speed: 2.6 m/min;
  • Maximum bevel in one run: 12 mm*;
  • Maximum bevel recommended in several runs: 17 mm*
    Maximum recommended thickness: plates and tubes up to 20 mm;
  • Nominal thickness: plates and tubes from 6 mm to 40 mm;
  • Double bevel with 2 machines working in parallel: CHP 12 + CHP12 INV;
  • Plate beveling: width min. 55 mm (for smaller width, please consult);
  • Tube bevelling: Ø min. int.100 mm;
  • Disc bevelling: Ø min. 350 mm.

* Dimensions calculated on 400 Mpa steel, bevel length.

Specifications

  • Motor: three-phase;
  • Motor power: 3 CV – 2.2 kW.

Voltage

  • 220/380 V. 50 Hz;
  • 250/440 V. 60 Hz;
  • For other voltages, please contact us.

Electric box with:

  • Thermomagnetic switch trip;
  • Emergency stop button;
  • Net weight: 65 Kg;
  • Works height: adjustable;
  • Reversing switch.

Bevel blueprint

Plate bevelling: K, V, X and Y bevels
Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters).
Bevel speed: 2.6 m/ min

Accesories

  • 3 cutters for mild steel (1 on machine);
  • 1 angle variation device – 30°;
  • 1 device to bevel tubes;
  • 1 set of spanners.

Extra

  • Cutters for mild steel;
  • Cutters for stainless steel;
  • Cutters for aluminum;
  • Angle variation devices: 22.5 – 25º – 30º – 35º – 37.5º – 45º;
    (For others angle, please enquire);
  • Plastic rollers to avoid material marking;
  • Spare part for small width plates: min. plates width 20 – 25 – 32 and 40 mm.

Video

Download data sheet

Download

Data sheet - Bevelling machine CHP 12 INV